Supported Protocols, Supported Algorithms and Referenced Standards¶
This section lists the network protocols PacketQC analyses, the cryptographic algorithms it recognises in each protocol, and the standards it references when assessing them.
Supported protocols¶
PacketQC identifies connections that use the following protocols in PCAP and PCAPNG files, and reads the algorithms negotiated in their handshakes.
Protocol |
Versions |
Algorithms read from the handshake |
|---|---|---|
TLS |
TLS 1.0, 1.1, 1.2 and 1.3 |
Cipher suites, supported groups and key shares, signature schemes, and signature and hash algorithms |
QUIC |
QUIC with TLS 1.3 |
Cipher suites, supported groups and key shares, and signature schemes, read from the TLS 1.3 handshake that QUIC carries |
SSH |
SSH-2, on any port |
Key exchange methods, host key algorithms, encryption algorithms, MAC algorithms and compression algorithms |
IPsec |
IKEv2 |
Encryption algorithms, pseudorandom functions, integrity algorithms, key exchange methods and authentication methods |
IPsec |
IKEv1 |
Encryption algorithms, hash algorithms, authentication methods and groups |
RDP |
Standard RDP Security |
Encryption method and encryption level. Standard RDP Security uses RC4, so PacketQC rates these connections as Insecure. |
Note
IKEv1 is deprecated by RFC 9395. PacketQC still identifies IKEv1 connections so that they can be found and replaced.
To capture traffic for these protocols, see Filtering for TLS, SSH and IPsec.
Supported algorithms¶
PacketQC names algorithms as they appear in the IANA registry for each protocol. It assesses each algorithm using the registry’s recommendation status and the IETF and NIST guidance listed in Standards referenced.
The lists below show every algorithm name PacketQC recognises. Select a list to expand it.
TLS¶
Registry: IANA Transport Layer Security (TLS) Parameters
Cipher suites (356)
|
|
Supported groups (57)
|
|
Signature schemes (51)
|
|
Signature algorithms (TLS 1.2) (8)
|
|
Hash algorithms (TLS 1.2) (8)
|
|
SSH¶
Registry: IANA Secure Shell (SSH) Protocol Parameters
PacketQC also recognises some names that are not listed in the IANA registry: OpenSSH algorithm names ending in @openssh.com, and pre-standard post-quantum names such as oqs-mlkem768.
Key exchange methods (44)
|
|
Host key algorithms (18)
|
|
Encryption algorithms (36)
|
|
MAC algorithms (10)
|
|
Compression algorithms (2)
|
|
IKEv2¶
Registry: IANA Internet Key Exchange Version 2 (IKEv2) Parameters
Transform Type 1: Encryption algorithms (32)
|
|
Transform Type 2: Pseudorandom functions (9)
|
|
Transform Type 3: Integrity algorithms (15)
|
|
Transform Type 4: Key exchange methods (28)
|
|
Authentication methods (7)
|
|
IKEv1¶
Registry: IANA Internet Key Exchange (IKE) Attributes
Encryption algorithms (8)
|
|
Hash algorithms (6)
|
|
Authentication methods (8)
|
|
Groups (key exchange) (26)
|
|
Post-quantum and hybrid algorithms¶
PacketQC recognises the following post-quantum algorithms, and hybrid algorithms that combine a post-quantum algorithm with a classical one. They are based on ML-KEM (FIPS 203), ML-DSA (FIPS 204), SLH-DSA (FIPS 205) and sntrup761.
This section lists post-quantum public-key algorithms (key exchange and signatures) only. Symmetric encryption and hash functions are not listed here: with large enough keys and outputs, such as AES-128 or larger and SHA-256 or larger, they are generally considered resistant to quantum attacks, and they are listed in Supported algorithms. Pre-standard drafts that were never approved, such as X25519Kyber768Draft00, are rated Insecure.
Protocol |
Algorithm names |
Type |
|---|---|---|
TLS |
|
Hybrid key exchange (ML-KEM with an elliptic curve) |
TLS |
|
Post-quantum key exchange (ML-KEM) |
TLS |
|
Post-quantum signature (ML-DSA) |
TLS |
|
Post-quantum signature (SLH-DSA) |
SSH |
|
Hybrid key exchange (ML-KEM with an elliptic curve) |
SSH |
|
Hybrid key exchange (sntrup761 with X25519) |
SSH |
|
Post-quantum key exchange (ML-KEM) |
SSH |
|
Post-quantum signature (ML-DSA) |
IKEv2 |
|
Post-quantum key exchange (ML-KEM) |
IKEv2 |
Post-quantum Preshared Keys (PPK) |
Preshared keys mixed into the key exchange (RFC 8784) |
Recognising an algorithm is separate from rating it. Each algorithm is rated against the IANA recommendation status and the guidance in Referenced standards, so a recognised algorithm is not always rated Quantum Secure.
Referenced standards¶
PacketQC references the following standards and guidance when identifying and assessing cryptographic algorithms.
IETF¶
Protocol specifications
RFC 9846: The Transport Layer Security (TLS) Protocol Version 1.3
RFC 5246: The Transport Layer Security (TLS) Protocol Version 1.2
RFC 9000: QUIC: A UDP-Based Multiplexed and Secure Transport
RFC 9001: Using TLS to Secure QUIC
RFC 4253: The Secure Shell (SSH) Transport Layer Protocol
RFC 7296: Internet Key Exchange Protocol Version 2 (IKEv2)
RFC 2409: The Internet Key Exchange (IKE)
Algorithm recommendations and deprecations
RFC 9847: IANA Registry Updates for TLS and DTLS
RFC 8996: Deprecating TLS 1.0 and TLS 1.1
RFC 7465: Prohibiting RC4 Cipher Suites
RFC 9155: Deprecating MD5 and SHA-1 Signature Hashes in TLS 1.2 and DTLS 1.2
RFC 10015: Deprecating Obsolete Key Exchange Methods in TLS 1.2 and DTLS 1.2
RFC 9142: Key Exchange (KEX) Method Updates and Recommendations for Secure Shell (SSH)
RFC 4344: The Secure Shell (SSH) Transport Layer Encryption Modes
RFC 8247: Algorithm Implementation Requirements and Usage Guidance for the Internet Key Exchange Protocol Version 2 (IKEv2)
RFC 9395: Deprecation of the Internet Key Exchange Version 1 (IKEv1) Protocol and Obsoleted Algorithms
Post-quantum and hybrid key exchange
RFC 10024: Post-Quantum Traditional (PQ/T) Hybrid Key Agreement Mechanisms for TLS 1.3
RFC 9941: Secure Shell (SSH) Key Exchange Method Using Hybrid Streamlined NTRU Prime sntrup761 and X25519 with SHA-512: sntrup761x25519-sha512
RFC 10042: Post-Quantum/Traditional Hybrid Key Exchange with the Module-Lattice-Based Key-Encapsulation Mechanism for Use in SSH
RFC 8784: Mixing Preshared Keys in the Internet Key Exchange Protocol Version 2 (IKEv2) for Post-quantum Security
NIST¶
FIPS 203: Module-Lattice-Based Key-Encapsulation Mechanism Standard (ML-KEM)
FIPS 204: Module-Lattice-Based Digital Signature Standard (ML-DSA)
FIPS 205: Stateless Hash-Based Digital Signature Standard (SLH-DSA)
IR 8547: Transition to Post-Quantum Cryptography Standards
SP 800-131A Rev. 2: Transitioning the Use of Cryptographic Algorithms and Key Lengths
SP 800-57 Part 1 Rev. 5: Recommendation for Key Management: Part 1, General
SP 800-38A: Recommendation for Block Cipher Modes of Operation: Methods and Techniques
SP 800-38D: Recommendation for Block Cipher Modes of Operation: Galois/Counter Mode (GCM) and GMAC
SP 800-186: Recommendations for Discrete Logarithm-based Cryptography: Elliptic Curve Domain Parameters
IANA¶
ETSI¶
PacketQC’s approach aligns with the following ETSI publications:
ETSI TS 103 744: Quantum-safe Hybrid Key Establishment. It describes hybrid key establishment that combines classical and quantum-safe key exchange, the approach used by the hybrid algorithms PacketQC recognises.
ETSI TR 103 619: Migration strategies and recommendations to Quantum Safe schemes. It describes migration in three stages, starting with an inventory of cryptographic assets, which PacketQC produces through its CBOMs.